Repairing the EXPLORER
The propeller drive train is assembled at the factory, and no adjustments can be made internally. Any tampering with the drive unit (attempting to disassemble) will void your one (1) year warranty or extended warranty if purchased later.
1. For best working conditions, place the HYDROBIKE (frame & floats) on a workbench so that the DT can be rotated easily during assembly.
2. The left side of the bike is the left side when riding the bike.
3. Tools required: Phillips Screwdriver, pliers and crescent wrench.
To Remove the Drive Train (DT)
1. Remove the chain by rotating to the up position
2. Remove the chain-guard screws on the left side of the bike using pliers to hold the spacers from turning.
3. Remove four Philips head screws next to the 16-tooth sprocket.
4. By pushing with the heal of your hand, push in on the sprocket to loosen the FL, or rubber-like bushing, assembly.
5. Pull the FL over the 16-tooth sprocket. The FL is not centered over the sprocket, so pull on the appropriate side of the FL. (Do NOT attempt to remove the 16-tooth sprocket.)
6. Remove the drive train from the left side of the bike frame.
7. All the old DT parts must be returned to FunWatercraft Products to complete the warranty.
